The Dingo Rough Terrain Tele-Fork is designed to go where most standard forks can't.

 

 

 

Normal forklifts struggle when they leave a flat surface. The Dingo Rough Terrain Tele-Fork is small enough to sit on the back of the truck with the load, and when you get there the RTTF simply drives down the ramps and delivers your load. Tight areas, gutters rough or soft ground are not a problem for the Dingo RTTF.

The Dingo Rough Terrain Tele-Fork is able to carry a substantial load - around twice as much as a Dingo.
This is due to its ability to pull the load back over the wheels for transport and further lifting, making it extremely safe.

 

 

 

 

 

Rough Terrain Tele-Fork in Action

Specifications
Engine:		20 hp
Hydraulic Pumps:		9 cc
Ground Speed:		0-6 km/h
Hydraulic Relief Pressure:		3400 psi
Hydraulic Pump Output:		32 l/m
Hydraulic Reservoir:		40 L
Wheel Motors:		4x29 cu in
Warranty: *Warranty Conditions Apply		3 Year*
Approximate Weight:		1150kg
Width:		760-1010mm
Length:		1780mm
Lift Height:		1550mm
SWL:	@ 600mm (centre of pallet) 450kg lift and carry [Calculated as the maximum load able to be lifted without the weight of an operator less 50 KG safety margin]
Centre of Weight :	@ 500mm 525kg @ 400mm 600kg @ 300mm 675kg
Used for: Moving loads in tight access and accoss rough terrain. Used by: Mines, factories, workshops, delivery drivers.