Dingo Mini Diggers | Products: Rotary Hoe

One of the biggest landscape contracting companies in the USA once described this attachment as “The most useful tool in his fleet”.

The K9 machines, and their predecessor - the 950, all handle rotary hoes with ease. The Dingo Rotary Hoe has a full one metre cut and digs to approximately 150mm in virgin soil. Hoeing is done with the machine in reverse, so you can clearly see where you are going and you aren’t running over freshly tilled soil.

Because the Dingos ground speed is hydraulically variable (with the flow divider), the hoe can be worked at a speed relative to the toughness of the soil being hoed. This allows fine hoeing, regardless of the soil condition. With this facility, the Dingo Rotary Hoe truly becomes a “one pass” hoe.

Hydraulics also mean that the relief valve is the safety valve - there are no shear pins or other damaging devices. Ideally, the Dingo Rotary Hoe is suited to tight area’s - gardens, nurseries, new estates etc. The Dingo Rotary Hoe is more than simply a soil tiller like most other small hoes on the market. It hoes as well as a larger tractor mounted unit.

Another common use for the rotary hoe is for loosening area’s where dirt has to be removed. I.e. if 150mm of topsoil needs to be removed to allow cement, chipbark or other material to be laid, then a rotary hoe can loosen the topsoil and the bucket can remove the dirt, thus leaving a clean flat bed for the new surface to be laid. A lot better than using rippers and a bucket.

FACTS AT A GLANCE \| Rotary Hoe
Width of Cut:	1m
Maximum cutting depth:	150mm
Tines:	Hardened, double edge, replaceable.
Speed:	Variable
Approx Weight:	170kg
Hydraulic flow:	40-47L/min
Used For:	Digging garden beds, loosening topsoil for removal.
Used By: :	Landscapers, Dingo Con-tractors, Hire Companies.